GL5 Pro Four-in-One Lighting System
White light, visible green laser, IR illuminator and IR laser share one compact housing. Four integrated functions reduce the need for separate devices on a compatible platform.
ROVYVON / Flashlight
GL5 Pro combines white illumination, visible green aiming, IR illumination and IR aiming in a compact square housing, with side-loading battery access and remote-switch compatibility.
In stock · Shipping calculated at checkout
Configure your light to match the way you carry and use it.
RovyVon GL5 Pro 4-in-1 400-Lumen Rail-Mounted Light
White light, visible green laser, IR illuminator and IR laser share one compact housing. Four integrated functions reduce the need for separate devices on a compatible platform.
The mode selector, lighting sources, adjustment controls, mounting interface, rear switches and remote port each have a defined location, making the device layout easier to understand.
Crossbolt uses screw-fastened mounting hardware for a fixed attachment. QD is a separate quick-release option; fit and retention depend on the rail and selected hardware.
The rail interface has an illustrated adjustment range of 20.7–21.7 mm, accommodating differences in rail width. Rail profile and mounting space remain important compatibility factors.
GL and 1913 Picatinny adapters support two different rail profiles. Adapter selection is separate from choosing Crossbolt or QD mounting hardware.
Three visible output choices combine white illumination and a green laser: white light only, green laser only, or both together. Each combination is a distinct selectable mode.
IR illumination provides scene lighting for compatible night-vision equipment, while the IR laser is a separate output. The available modes also include combined IR operation.
A green indicator lights when an IR mode is selected, providing an easily seen status cue for output that is not normally visible to the naked eye.
Visible green and IR lasers share a linked windage and elevation adjustment mechanism rather than two independent adjustment assemblies.
The side-loading compartment accepts one CR123 or compatible rechargeable 16340 battery. Battery access is separate from the mounting assembly, without onboard charging.
Mirrored rear switches support momentary and constant-on activation from either side, with both functions built into the same control layout.
The remote-control port supports optional GS1 and GS4 switches for an alternative control location. These accessories are sold separately.
Select Black or Desert Tan in the purchase area, then choose Crossbolt, QD, or the QD + Crossbolt hardware package. Crossbolt and QD are the two mounting methods; the bundle simply includes both.
Mount Type
A mechanically secured mounting method for users who prioritize retention and a more permanent installation.
A quick-detach mounting method for faster removal and reinstallation.
Includes both QD and Crossbolt hardware. This is a purchase bundle, not a third mounting method.
Both offer four light and laser functions. The GL5 Pro uses a low-profile square housing with side-loading battery access, while the GL4 Pro uses a different housing design with front-loading battery access. Choose based on available mounting space, control preferences, and installation requirements.
The GL5 Pro includes a 400-lumen white light, a 520 nm green laser rated below 5 mW, a 300 mW IR illuminator at 850 nm, and an IR laser rated below 0.7 mW.
Yes. Its side-loading battery compartment allows routine battery replacement while the mounted body stays on the rail. Verify the mounting and alignment after maintenance.
Yes. It supports one CR123 battery or one compatible rechargeable 16340 Li-ion battery. The rechargeable battery must be charged separately because the GL5 Pro does not have built-in charging.
The GL5 Pro provides approximately 1.5 hours of runtime in white-light or IR-illuminator operation. Runtime may vary depending on the battery, operating conditions, and selected mode.
Yes. The GL5 Pro has a remote-switch interface and supports compatible RovyVon pressure switches, available separately. The remote switch provides momentary and constant-on operation.
Yes. The rear controls allow direct operation without an external switch. The current user manual describes paddle-based momentary and constant-on operation. Remote-switch activation has its own control sequence.
Yes. The visible green and IR aiming lasers use a shared adjustment system. Both move together when windage or elevation is adjusted, but their final alignment should still be verified.
Yes. Its 850 nm IR illuminator and IR aiming laser are designed for use with compatible night vision equipment. The white light and visible green laser can be used without night vision.
The GL5 Pro offers Crossbolt and QD mounting options and supports appropriate GL and 1913 rail adapters. The QD + Crossbolt package includes both mounting hardware choices.
Holster compatibility depends on the exact firearm, rail configuration, holster design, and mounted accessories. The GL5 Pro is not guaranteed to fit holsters designed for other weapon lights. Confirm compatibility with the holster manufacturer before purchasing.
RovyVon GL5 Pro 4-in-1 400-Lumen Rail-Mounted Light
$319.96
Black · Crossbolt
Included
RovyVon RG01 Cross-bolt Mount
$79.95
RovyVon GS1 Single-Cable Remote Switch
$49.95
RovyVon GS4 Remote Switch
$49.95
5% automatically on 2+ items
Final discount and total are calculated in the cart.
Product manuals and support resources.